|
|
Build Your Online Product Catalogs?
| Product Name: |
One-component Silicone Sealant
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
0 |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
One-component silicone sealant (single-component silicone sealant) is a kind of material that is similar to ointment, and will solidify into a type of tough rubber solid once contacts the moisture in the air. It has excellent adhesion performance, such as very good bonding effect. And it is resistant to weather, anti-shaking, moistureproof and suitable for low and high temperature. One-component silicone sealant will not flow for the weight of itself, so it can be used in the joints of over top or the side wall and will not sag or flow away. What's more, it can realize strong adhesion to the most building materials. Therefore, its applicable value is very high. It is mainly used in the bonding of clean metal, glass, most wood that not contains grease, silicone resin, ceramic, natural and synthetic fiber.
Features:
One component and easy to operate.
Neutral sealant.
Quick curing at room temperature with good bonding performance to most materials.
Can be used in any seasons.
No sagging.
Excellent corrosion, weather, aging, UV, high and low temperature and ozone pollution resistance.
Package:
280ml/300ml/260ml per cartridge, and 24pcs in one carton.
20L/200L per drum.
Pack the silicone sealant according to the amount of products and customers' requirements.
Shelf life: 12 months in the original package in cool and dry environment at the temperature between +5°C - +25°C (please pay attention to the manufacturing date on the package).
Properties:
Color: white, black, tran***rent, gray, silver gray, beige, brown or customized.
Skin cure time: 5 - 20 minutes.
Total cure time: 24 hours.
Hardness: 30 ± 2 Shore A.
Tensile strength: 0.45***
Elongation at break: �00%.
Using method:
Clean the surface by using some solvents, such as toluene or acetone, to get rid of the rust, oil or other dirt and keep the joint dry.
Cut the tip off cartridge, screw on nozzle, and cut the nozzle slantingly to desired size at the angle of 45°.
Push sealant ahead at the angle of 45°, and squeeze out the seal |
| Company: |
Hebei Ruida Engineering Rubber and Plastics Co., Ltd.
|
| Contact: |
Ms. Bi Yanning |
| Address: |
High-tech development zone, Hengshui, Hebei, China. |
| Postcode: |
053000 |
| Tel: |
+86-318-2215985 |
| Fax: |
+86-318-2215985 |
| E-mail: |
|
|
|
|
Home
